Polaris single short bushing M10
Polaris short single M10 bushing. OEM #5452233. Used in many different machines. Sold as 1 quantity. Just add as many to the cart as needed.
Polaris single short bushing M12
Polaris short single M12 bushing. OEM #5452271. Used in many different machines. Sold as 1 quantity. Just add as many to the cart as needed.
Polaris M10 End cap
Polaris M10 End cap with O ring. OEM #1543611. Used in many different machines. Sold as 1 quantity. Just add as many to the cart as needed. Our end caps are equal or better than the oem caps.
Rubber storage latch with lock
Rubber latch for Polaris storage boxes like Lock N ride and many others. Has the locking tab too. May fit other storage boxes as well. 4" long.
Flange castle nuts
Set of 4 flanged castle nuts for cv shafts. These are grade 10.9 and are super strong and carry the load much better than a standard axle nut. This will definitely help lengthen your bearing change interval. M18x1.5 thread pitch. Fit's most, if not all Polaris axles, possible others too.
Polaris Rzr, Ranger, Sportsman stock replacement ball joints
Stock replacement style ball joint. This high quality ball joint are a great substitute for oem ball joints. The 5/8" ball joint will fit the RZR 800, 900, 900xp, 1000 S, pre 2021 Rangers, Sportsman and Scrambler 550/850/1000. Priced each. Oem# 7081580, 7081505, 7061220, 7081665, 7081666, 7081859, 7081924, 7081991, 7082507 and 42-1037.
Polaris Rzr 1000 stock replacement ball joints
Rzr 1000, RS1, 2021+ Ranger 1000, Turbo rzr, 2021+ General's, stock replacement style ball joint. This high quality ball joint are a great substitute for oem ball joints. The Priced each. Oem#7082892, 7081867, 7082275, 7082422, 7082487, 7081992 and 42-1051.
TPEE Outer CV Boot kit for aftermarket axles
TPEE outer cv boot kit for aftermarket axles like Demon, Rhino, Warthog, Gorilla etc. The boot part number is 3200512703. The kit comes as pictured with clamps and HQ German grease. 80mm ID x 23.5mm shaft.
TPEE Inner CV Boot kit for aftermarket axles
TPEE inner cv boot kit for aftermarket axles like Demon, Rhino, Warthog, Gorilla etc. The boot part number is 3200412703. The kit comes as pictured with clamps and HQ German grease. 75mm ID x 23.5mm shaft.
Polaris 44mm Wheel bearing
Polaris 44mm wheel bearings. These high quality SWA brand bearings are a HD quality replacement wheel bearing that uses very good seals to keep dirt and water out. Fits many Polaris machines like Rzr 900, Rzr 1000, General, Sportsman 550,850 and 1000. Ranger 900 and 1000. Price per bearing. I've also added a bearing greasing option. I always recommend buying a bearing greaser, but I now have an option that I'll grease the bearings fully before they ship out. This will roughly double the bearing life.. I also have an option for adding on the HD flange castle nuts now too.
High Quality Sintered brake pads RZR 900/1000
High quality FA452 Sintered brake pads. These sintered pads are a great quality replacement pad. I've been using these on our own Rzr 1000 and they last very long. Double to triple the life of the cheaper semi metallic and sintered copper pads. Good in the mud. These are the best pads I've found for the buck. These will fit the front of 900xp, and front and rear of many Rzr 1000's and Rangers, Early turbo Rzr's, other machines as well. Replaces Oem#2203747, 2205949,
2011+ Polaris RZR RS1 900 1000 Trailing arm bearings
Our high quality hardened bearing steel spherical bearings are a excellent choice for replacing your worn out oem bearings in you 2011+ Rzr 900xp, 1000xp and RS1 trailing arms. Replaces oem#3514689. Sold as a pair(2 bearings and 4 O rings)
2018-22 Polaris RS1 Front A arm set.
2018-22 Polaris RS1 front bushing set. Includes 8 of the M10 and 4 M12 polyurethane bushings plus our high quality zinc coated sleeves. You can't buy a better set of bushings for the money. Our bushings use an interference fit, which means the hole is smaller than the sleeve. This creates a perfect seal and I guarantee these will last longer than anything you've tried before.
