Polaris short single M10 bushing. OEM #5452233.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Polaris short single M12 bushing. OEM #5452271.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Polaris M10 End cap with O ring. OEM #1543611.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed. Our end caps are equal or better than the oem caps.

Polaris short single bushing. OEM #5439874.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Rubber latch for Polaris storage boxes like Lock N ride and many others. Has the locking tab too. May fit other storage boxes as well. 4" long.

Polaris long single bushing. OEM #5436973.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Polaris long single bushing. OEM #5437651.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Polaris rzr 800 lower knuckle single bushing. OEM #5439878.  Used in a couple different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Set of 4 flanged castle nuts for cv shafts. These are grade 10.9 and are super strong and carry the load much better than a standard axle nut. This will definitely help lengthen your bearing change interval.  M18x1.5 thread pitch. Fit's most, if not all Polaris axles, possible others too.

Polaris Sportsman and Scrambler Nylon steering shaft bushings. These will fit machines from 2009-2023.  These come in my billet steering support set and will work using the oem steering support too.  Replaces OEM#5438904.  Includes 2 half bushings as pictured.

This is the primary clutch spring from several 2015+ Polaris machines including, Rzr 900, 1000, Ace, General, Sportsman HL etc.  It has a 58-135lb spring pressure. Sold as 1.

Polaris shifter shaft bushings.  Fits many many models of atv and Rzr. Fixes the dreaded loose shifter shifter. Our high quality nylon shifter bushings will replace the weak tiny oem bushings and keep your shifter tight for years to come.  Sold as a set of 2 bushings. Replaces oem#5433189. Also fits many brake pedal applications, but might need to be trimmed shorter.

Aftermarket aluminum thumb throttle for the Sportsman and Scrambler 500/570/800/550/850/1000.  The stock ones are plastic and break fairly easily.  This one wont leave you stranded.  I have these in 2 colors. Red and Silver.. Priced per 1.

Aftermarket aluminum water pump impeller for the RZR 800 and Sportsman 800.  The stock ones are plastic and can melt under extreme hot temperatures.  This one wont leave you stranded. Priced per 1.

Stock replacement style ball joint.  This high quality ball joint are a great substitute for oem ball joints.  This ball joint will fit the Sportsman 450, 500, 570 and 800 chassis using strut type front suspenson. OEM strength. Priced each.

SWA premium Polaris 35x64x37 wheel bearings.  These fit the 2008+ Sportsman 450 500 570 800, small chassis Ranger, Ace, that use strut suspension.  Replaces oem#3514634, 3514342

2009+ Polaris Sportsman or Scrambler 550 850 1000 HD transmission shift lever. This super high quality stainless steel lever will never strip out like the stock Aluminum one does.  This is a direct replacement for the OEM shift lever and has a lifetime warranty.   Priced each.

Polaris Sportsman and Scrambler Polyurethane rear sway bar bushings. These will fit machines from 2009-2022.  They will also fit the Sportsman 450 and 570.  Ranger 400, 800 and 900. Rzr 570 and 800 too.  If your rear sway bar is 25MM(1"), then these one piece bushings will work great and last a long time. Replaces OEM#5439731

2015+ Polaris RZR 1000 2 & 4 seat, turbo, General and some Rangers, rear sway bar bushings.  If your rear sway bar is 27MM, then these one piece bushings will work great and last a long time. Replaces OEM#5451568

2014+ Polaris RZR 1000 2 & 4 seat, General and some Rangers, rear sway bar bushings.  If your rear sway bar is 28.5MM, then these one piece bushings will work great and last a long time. Replaces OEM#5450606

2020+ Polaris General and Polyurethane 26mm front sway bar bushing set.  These one piece bushings will last a long time vs oem bushings and fit very tight.  Includes 2 bushings.  Replaces OEM#5456438. If at all in doubt, please measure you bar to confirm before ordering. Early Generals also use the 21mm size bar and some use a 28mm bar(coming soon)

Stock replacement style ball joint.  This high quality ball joint are a great substitute for oem ball joints.  The 5/8" ball joint will fit the RZR 800, 900, 900xp, 1000 S, pre 2021 Rangers, Sportsman and Scrambler 550/850/1000.  Priced each. Oem# 7081580, 7081505, 7061220, 7081665, 7081666, 7081859, 7081924, 7081991, 7082507 and 42-1037.

Rzr 1000, RS1, 2021+ Ranger 1000, Turbo rzr, 2021+ General's, stock replacement style ball joint.  This high quality ball joint are a great substitute for oem ball joints.  The Priced each. Oem#7082892, 7081867, 7082275, 7082422, 7082487, 7081992 and 42-1051.

Polaris sway bar end link bushings. Made from premium polyurethane like our other sway bar bushings. 90A durometer makes them a bit stiffer than the oem rubber type.  Our set includes 4 bushings as shown. These fit many different machines from Sportsman 300-800, Sportsman 550-1000, Rangers, Rzr 570, 800, Hawkeye, plus many more. Replaces #5416013, 5413295

TPEE outer cv boot kit for aftermarket axles like Demon, Rhino, Warthog, Gorilla etc.  The boot part number is 3200512703. The kit comes as pictured with clamps and HQ German grease. 80mm ID x 23.5mm shaft.

TPEE inner cv boot kit for aftermarket axles like Demon, Rhino, Warthog, Gorilla etc.  The boot part number is 3200412703. The kit comes as pictured with clamps and HQ German grease. 75mm ID x 23.5mm shaft.

Polaris 44mm wheel bearings. These high quality SWA brand bearings are a HD quality replacement wheel bearing that uses very good seals to keep dirt and water out. Fits many Polaris machines like Rzr 900, Rzr 1000, General, Sportsman 550,850 and 1000. Ranger 900 and 1000. Price per bearing. I've also added a bearing greasing option. I always recommend buying a bearing greaser, but I now have an option that I'll grease the bearings fully before they ship out. This will roughly double the bearing life.. I also have an option for adding on the HD flange castle nuts now too.

Polaris 40mm wheel bearings. These SWA premium bearings are equal to OEM quality bearings. Sold as 1 bearing. I've also added a bearing greasing option. I always recommend buying a bearing greaser, but I now have an option that I'll grease the bearings fully before they ship out. This will roughly double the bearing life. These bearings fit many rear Sportsman, rzr 800, 570 and many mid frame Ranger's.

Primary clutch puller for the rzr 900 and 1000 clutches.  Fits the Polaris 900 & 1000 engines in the Rzr, General, Ranger etc. HD tempered steel.  Corrosion coated

Lose your square puck sliders in the secondary clutches of 2016+ Polaris Rzr 900,1000, Ranger, General and Sportsman 570, 850, 1000's too.  The square puck sliders cause un needed wear and much slower up shifting and down shifting.  These new DK rollers are made from a Thermoplastic that is not only incredibly durable, but can withstand very high temperatures too.  Put a set of these in your secondary clutch before the wear is too much and you have to replace the whole clutch.  Comes with both rollers and 2 roll pins as well. These don't fit the turbo models. 1 year warranty.