Polaris short single M10 bushing. OEM #5452233.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Polaris M10 End cap with O ring. OEM #1543611.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed. Our end caps are equal or better than the oem caps.

Polaris short single bushing. OEM #5439874.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Rubber latch for Polaris storage boxes like Lock N ride and many others. Has the locking tab too. May fit other storage boxes as well. 4" long.

Polaris long single bushing. OEM #5436973.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Set of 4 flanged castle nuts for cv shafts. These are grade 10.9 and are super strong and carry the load much better than a standard axle nut. This will definitely help lengthen your bearing change interval.  M18x1.5 thread pitch. Fit's most, if not all Polaris axles, possible others too.

Polaris shifter shaft bushings.  Fits many many models of atv and Rzr. Fixes the dreaded loose shifter shifter. Our high quality nylon shifter bushings will replace the weak tiny oem bushings and keep your shifter tight for years to come.  Sold as a set of 2 bushings. Replaces oem#5433189. Also fits many brake pedal applications, but might need to be trimmed shorter.

2015+ Polaris RZR 1000 2 & 4 seat, turbo, General and some Rangers, rear sway bar bushings.  If your rear sway bar is 27MM, then these one piece bushings will work great and last a long time. Replaces OEM#5451568

2015+ Polaris RZR 900, 1000 and many Generals, Polyurethane front sway bar bushings. These one piece bushings will work great and last a long time. Replaces OEM#5452274. Doesn't fit Turbo S, Pro xp or Pro R, which have larger front bars. Fits the 21mm front sway bars.

Stock replacement style ball joint.  This high quality ball joint are a great substitute for oem ball joints.  The 5/8" ball joint will fit the RZR 800, 900, 900xp, 1000 S, pre 2021 Rangers, Sportsman and Scrambler 550/850/1000.  Priced each. Oem# 7081580, 7081505, 7061220, 7081665, 7081666, 7081859, 7081924, 7081991, 7082507 and 42-1037.

TPEE outer cv boot kit for aftermarket axles like Demon, Rhino, Warthog, Gorilla etc.  The boot part number is 3200512703. The kit comes as pictured with clamps and HQ German grease. 80mm ID x 23.5mm shaft.

TPEE inner cv boot kit for aftermarket axles like Demon, Rhino, Warthog, Gorilla etc.  The boot part number is 3200412703. The kit comes as pictured with clamps and HQ German grease. 75mm ID x 23.5mm shaft.

Polaris 44mm wheel bearings. These high quality SWA brand bearings are a HD quality replacement wheel bearing that uses very good seals to keep dirt and water out. Fits many Polaris machines like Rzr 900, Rzr 1000, General, Sportsman 550,850 and 1000. Ranger 900 and 1000. Price per bearing. I've also added a bearing greasing option. I always recommend buying a bearing greaser, but I now have an option that I'll grease the bearings fully before they ship out. This will roughly double the bearing life.. I also have an option for adding on the HD flange castle nuts now too.

Primary clutch puller for the rzr 900 and 1000 clutches.  Fits the Polaris 900 & 1000 engines in the Rzr, General, Ranger etc. HD tempered steel.  Corrosion coated

Lose your square puck sliders in the secondary clutches of 2016+ Polaris Rzr 900,1000, Ranger, General and Sportsman 570, 850, 1000's too.  The square puck sliders cause un needed wear and much slower up shifting and down shifting.  These new DK rollers are made from a Thermoplastic that is not only incredibly durable, but can withstand very high temperatures too.  Put a set of these in your secondary clutch before the wear is too much and you have to replace the whole clutch.  Comes with both rollers and 2 roll pins as well. These don't fit the turbo models. 1 year warranty.

High quality FA452 Sintered brake pads.  These sintered pads are a great quality replacement pad.  I've been using these on our own Rzr 1000 and they last very long. Double to triple the life of the cheaper semi metallic and sintered copper pads. Good in the mud. These are the best pads I've found for the buck.  These will fit the front of 900xp, and front and rear of many Rzr 1000's and Rangers, Early turbo Rzr's, other machines as well. Replaces Oem#2203747, 2205949,

High quality FA456 Sintered brake pads.  These sintered pads are a great quality replacement pad. Double to triple the life of the cheaper semi metallic and sintered copper pads. Good in the mud. These are the best pads for the buck.  These will fit the RZR 570, 800, 900, some Rangers and early General rear, plus other machines as well. Replaces Oem#2203318

Polyurethane shock bushing set for the Polaris factory Sachs shocks.  This includes enough bushings for 2 black Sachs shocks.  Perfect candidate is the Sportsman 450/500/570/800 that have strut suspension in the front and standard shock in rear.  Also the new Sportsman S rear shocks.  This set uses a 30mm and 35mm bushing width.  Some machines use 30mm top and bottom and some use 35mm top and bottom.  Include a message for the width you require if different than the 30/35 combo.

Polaris small stud greasable, non adjustable ball joints. The 5/8" ball joint will fit the RZR 800, 900, 1000 S, 900xp, and some early Generals as well. Sportsman and Scrambler 550/850/1000. These will last twice as long as the oem style non greasable.

2017+ Rzr 900 1000 S rear hub bushing set, sleeve and end cap set. Fits General and the 2018+ Rzr 900.

Koyo bearings and seal kit for the Rzr 900 1000. Also fits the General, and Ranger too.  Includes the 3 high quality Koyo bearings and high quality pinion and axle seals too.  Doesn't include the side case O ring. Use dropdown to pick 900 or 1000 diff.

2017+ RZR 900 and RZR 1000 50" 55" and the 60" S models Plus some Generals too.  Includes the front, rear and rear hub(knuckle) polyurethane bushings. This is the new style bushings.  Includes 30 M10 bushings and 4 M12 size bushings.  You can't buy a better set of bushings for the money.  Our bushings use an interference fit, which means the hole is smaller than the sleeve. This creates a perfect seal and I guarantee these will last longer than anything you've tried before.

Heavy duty reverse chain for many Polaris machines. Fits rzr 900xp, rzr 900, rzr 1000, ranger 900 and 1000, Ace, Sportsman Scrambler 850/1000.  Our custom made chains have more high strength links that make it 1.5mm wider than the oem chain. Still fits the stock gears with no modification. Replaces oem#3234737

2015 Polaris RZR 900 complete polyurethane bushing set for the 50" 55" and early date 60" models(build date March 2015 and earlier). Includes the front, rear and rear knuckle bushings.   You can't buy a better set of bushings for the money.  Our bushings use an interference fit, which means the hole is smaller than the sleeve. This creates a perfect seal and I guarantee these will last longer than anything you've tried before. I highly recommend new sleeves.

2016 Polaris RZR 900, 1000 S complete polyurethane bushing set for the 50" 55" and 60" models. Includes the front, rear and rear knuckle bushings.  You can't buy a better set of bushings for the money.  Our bushings use an interference fit, which means the hole is smaller than the sleeve. This creates a perfect seal and I guarantee these will last longer than anything you've tried before.

2011+ Rzr, Ranger and General 900 & 1000 Koyo transmission bearing kit. This kit includes the 12 roller bearings needed to upgrade the oem Peer bearings to a high quality Koyo brand bearing. If you have the turbo style transmission, which is the transmission with gear to gear reverse, use the dropdown menu to add the extra 3 bearings for that transmission.

2015+ Rzr and Ranger 900 primary clutch with EBS. This super high quality oem clutch replacement that is every bit as high of quality. Our new clutches use the oem type SAE hardware, not metric hardware like other aftermarket clutches do. This clutch uses the 1 way bearing(EBS). Message me for any clutching questions. OEM #1323283