Polaris single short bushing M10
Polaris short single M10 bushing. OEM #5452233. Used in many different machines. Sold as 1 quantity. Just add as many to the cart as needed.
Polaris single short bushing M12
Polaris short single M12 bushing. OEM #5452271. Used in many different machines. Sold as 1 quantity. Just add as many to the cart as needed.
Polaris single short bushing
Polaris short single bushing. OEM #5439874. Used in many different machines. Sold as 1 quantity. Just add as many to the cart as needed.
Rubber storage latch with lock
Rubber latch for Polaris storage boxes like Lock N ride and many others. Has the locking tab too. May fit other storage boxes as well. 4" long.
Polaris single long bushing
Polaris long single bushing. OEM #5436973. Used in many different machines. Sold as 1 quantity. Just add as many to the cart as needed.
Flange castle nuts
Set of 4 flanged castle nuts for cv shafts. These are grade 10.9 and are super strong and carry the load much better than a standard axle nut. This will definitely help lengthen your bearing change interval. M18x1.5 thread pitch. Fit's most, if not all Polaris axles, possible others too.
Polaris primary clutch spring 7044263
This is the primary clutch spring from several 2015+ Polaris machines including, Rzr 900, 1000, Ace, General, Sportsman HL etc. It has a 58-135lb spring pressure. Sold as 1.
Polaris strut front wheel bearing
SWA premium Polaris 35x64x37 wheel bearings. These fit the 2008+ Sportsman 450 500 570 800, small chassis Ranger, Ace, that use strut suspension. Replaces oem#3514634, 3514342
Polaris Rzr, Ranger, Sportsman stock replacement ball joints
Stock replacement style ball joint. This high quality ball joint are a great substitute for oem ball joints. The 5/8" ball joint will fit the RZR 800, 900, 900xp, 1000 S, pre 2021 Rangers, Sportsman and Scrambler 550/850/1000. Priced each. Oem# 7081580, 7081505, 7061220, 7081665, 7081666, 7081859, 7081924, 7081991, 7082507 and 42-1037.
Polaris sway bar end link bushings
Polaris sway bar end link bushings. Made from premium polyurethane like our other sway bar bushings. 90A durometer makes them a bit stiffer than the oem rubber type. Our set includes 4 bushings as shown. These fit many different machines from Sportsman 300-800, Sportsman 550-1000, Rangers, Rzr 570, 800, Hawkeye, plus many more. Replaces #5416013, 5413295
TPEE Outer CV Boot kit for aftermarket axles
TPEE outer cv boot kit for aftermarket axles like Demon, Rhino, Warthog, Gorilla etc. The boot part number is 3200512703. The kit comes as pictured with clamps and HQ German grease. 80mm ID x 23.5mm shaft.
TPEE Inner CV Boot kit for aftermarket axles
TPEE inner cv boot kit for aftermarket axles like Demon, Rhino, Warthog, Gorilla etc. The boot part number is 3200412703. The kit comes as pictured with clamps and HQ German grease. 75mm ID x 23.5mm shaft.
High Quality Sintered brake pads RZR 900/1000
High quality FA452 Sintered brake pads. These sintered pads are a great quality replacement pad. I've been using these on our own Rzr 1000 and they last very long. Double to triple the life of the cheaper semi metallic and sintered copper pads. Good in the mud. These are the best pads I've found for the buck. These will fit the front of 900xp, and front and rear of many Rzr 1000's and Rangers, Early turbo Rzr's, other machines as well. Replaces Oem#2203747, 2205949,
High Quality Sintered brake pads RZR 800
High quality FA456 Sintered brake pads. These sintered pads are a great quality replacement pad. Double to triple the life of the cheaper semi metallic and sintered copper pads. Good in the mud. These are the best pads for the buck. These will fit the RZR 570, 800, 900, some Rangers and early General rear, plus other machines as well. Replaces Oem#2203318
High Quality Sintered brake pads RZR Sportsman 800
High quality FA159 Sintered brake pads. These sintered pads are a great quality replacement pad. Double to triple the life of the cheaper semi metallic and sintered copper pads. Good in the mud. These are the best pads for the buck. These will fit the RZR 570, 800 rear, Sportsman 500, 570, 800 plus other machines as well. Replaces Oem#2202412
1/2 Sachs shock bushing set for 2 shocks
Polyurethane shock bushing set for the Polaris factory Sachs shocks. This includes enough bushings for 2 black Sachs shocks. Perfect candidate is the Sportsman 450/500/570/800 that have strut suspension in the front and standard shock in rear. Also the new Sportsman S rear shocks. This set uses a 30mm and 35mm bushing width. Some machines use 30mm top and bottom and some use 35mm top and bottom. Include a message for the width you require if different than the 30/35 combo.
29-70 Primary clutch weights
29-70 Primary clutch weights. These came oem in the Ace 900 and 17+ Rzr 1000 and 1000 xp4, High lifter too. Oem#5633321
Polaris HD Reverse chain
Heavy duty reverse chain for many Polaris machines. Fits rzr 900xp, rzr 900, rzr 1000, ranger 900 and 1000, Ace, Sportsman Scrambler 850/1000. Our custom made chains have more high strength links that make it 1.5mm wider than the oem chain. Still fits the stock gears with no modification. Replaces oem#3234737
2014-18 Polaris Ace 325 570 Complete Polyurethane set
2014-18 Polaris Ace Polyurethane bushing set. This set does the front and rear A arms and the rear knuckle bushings too. You can't buy a better set of bushings for the money. Our bushings use an interference fit, which means the hole is smaller than the sleeve. This creates a perfect seal and I guarantee these will last longer than anything you've tried before.
2011-Current RZR General 900 1000 Koyo transmission bearing kit.
2011+ Rzr, Ranger and General 900 & 1000 Koyo transmission bearing kit. This kit includes the 12 roller bearings needed to upgrade the oem Peer bearings to a high quality Koyo brand bearing. If you have the turbo style transmission, which is the transmission with gear to gear reverse, use the dropdown menu to add the extra 3 bearings for that transmission.
