Polaris short single M10 bushing. OEM #5452233.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Polaris short single M12 bushing. OEM #5452271.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

Rubber latch for Polaris storage boxes like Lock N ride and many others. Has the locking tab too. May fit other storage boxes as well. 4" long.

Polaris long single bushing. OEM #5436973.  Used in many different machines. Sold as 1 quantity.  Just add as many to the cart as needed.

This is the primary clutch spring from several 2015+ Polaris machines including, Rzr 900, 1000, Ace, General, Sportsman HL etc.  It has a 58-135lb spring pressure. Sold as 1.

Aftermarket aluminum water pump impeller for the RZR 800 and Sportsman 800.  The stock ones are plastic and can melt under extreme hot temperatures.  This one wont leave you stranded. Priced per 1.

Polaris Sportsman and Scrambler Polyurethane rear sway bar bushings. These will fit machines from 2009-2022.  They will also fit the Sportsman 450 and 570.  Ranger 400, 800 and 900. Rzr 570 and 800 too.  If your rear sway bar is 25MM(1"), then these one piece bushings will work great and last a long time. Replaces OEM#5439731

2015+ Polaris RZR 1000 2 & 4 seat, turbo, General and some Rangers, rear sway bar bushings.  If your rear sway bar is 27MM, then these one piece bushings will work great and last a long time. Replaces OEM#5451568

2014+ Polaris RZR 1000 2 & 4 seat, General and some Rangers, rear sway bar bushings.  If your rear sway bar is 28.5MM, then these one piece bushings will work great and last a long time. Replaces OEM#5450606

2015+ Polaris RZR 900, 1000 and many Generals, Polyurethane front sway bar bushings. These one piece bushings will work great and last a long time. Replaces OEM#5452274. Doesn't fit Turbo S, Pro xp or Pro R, which have larger front bars. Fits the 21mm front sway bars.

Oem replacement tie rod end for the 2008-14 Rzr 800 and S, RZR 570's and RZR 900xp.  These come as a set of 2 as shown. This will do both sides of the machine.

Stock replacement style ball joint.  This high quality ball joint are a great substitute for oem ball joints.  The 5/8" ball joint will fit the RZR 800, 900, 900xp, 1000 S, pre 2021 Rangers, Sportsman and Scrambler 550/850/1000.  Priced each. Oem# 7081580, 7081505, 7061220, 7081665, 7081666, 7081859, 7081924, 7081991, 7082507 and 42-1037.

Rzr 1000, RS1, 2021+ Ranger 1000, Turbo rzr, 2021+ General's, stock replacement style ball joint.  This high quality ball joint are a great substitute for oem ball joints.  The Priced each. Oem#7082892, 7081867, 7082275, 7082422, 7082487, 7081992 and 42-1051.

2020+ Polaris Pro xp Polyurethane 27mm front sway bar bushing set.  These one piece bushings will last a long time vs oem bushings and fit very tight.  Includes 2 bushings.  Replaces OEM#5456363.

Polaris sway bar end link bushings. Made from premium polyurethane like our other sway bar bushings. 90A durometer makes them a bit stiffer than the oem rubber type.  Our set includes 4 bushings as shown. These fit many different machines from Sportsman 300-800, Sportsman 550-1000, Rangers, Rzr 570, 800, Hawkeye, plus many more. Replaces #5416013, 5413295

Polaris 44mm wheel bearings. These high quality SWA brand bearings are a HD quality replacement wheel bearing that uses very good seals to keep dirt and water out. Fits many Polaris machines like Rzr 900, Rzr 1000, General, Sportsman 550,850 and 1000. Ranger 900 and 1000. Price per bearing. I've also added a bearing greasing option. I always recommend buying a bearing greaser, but I now have an option that I'll grease the bearings fully before they ship out. This will roughly double the bearing life.. I also have an option for adding on the HD flange castle nuts now too.

Polaris 40mm wheel bearings. These SWA premium bearings are equal to OEM quality bearings. Sold as 1 bearing. I've also added a bearing greasing option. I always recommend buying a bearing greaser, but I now have an option that I'll grease the bearings fully before they ship out. This will roughly double the bearing life. These bearings fit many rear Sportsman, rzr 800, 570 and many mid frame Ranger's.

Primary clutch puller for the rzr 900 and 1000 clutches.  Fits the Polaris 900 & 1000 engines in the Rzr, General, Ranger etc. HD tempered steel.  Corrosion coated

Lose your square puck sliders in the secondary clutches of 2016+ Polaris Rzr 900,1000, Ranger, General and Sportsman 570, 850, 1000's too.  The square puck sliders cause un needed wear and much slower up shifting and down shifting.  These new DK rollers are made from a Thermoplastic that is not only incredibly durable, but can withstand very high temperatures too.  Put a set of these in your secondary clutch before the wear is too much and you have to replace the whole clutch.  Comes with both rollers and 2 roll pins as well. These don't fit the turbo models. 1 year warranty.

2022+ Polaris Pro R sway bar bushings.. Our 1 piece bushings will tighten up your Pro R 32mm sway bars front or rear. Comes with 2 bushings in our set. Replaces #5456496

Polaris secondary rollers. These are the smaller rollers that came in many Polaris secondary clutches from 2004+.  These will work on the outside and in the helix side too.  These are 23.5mm x 14mm wide.  These new DK rollers are made from a Thermoplastic that is not only incredibly durable, but can withstand very high temperatures too.  Put a set of these in your secondary clutch and bring it back to life.  Comes with both rollers and 2 roll pins as well. Replaces oem#3234197 1 year warranty.

Polaris small stud greasable, non adjustable ball joints. The 5/8" ball joint will fit the RZR 800, 900, 1000 S, 900xp, and some early Generals as well. Sportsman and Scrambler 550/850/1000. These will last twice as long as the oem style non greasable.

1 way primary clutch bearing for the rzr 900 and 1000 machines that have EBS.  And a replacement bearing for my clutches as well.

2011+ Rzr, General 900 and 1000 transmission seal set. Includes the 3 High quality NQK-SF seals(no input seal) that do the axle and output shafts, which are the most common ones that will leak and need replacing. Does not fit the Turbo or RS1 models.

29-75 Primary clutch weights. These are oem weights for the 2017-23 Rzr 1000. Replaces oem#5633720

29-70 Primary clutch weights.  These came oem in the Ace 900 and 17+ Rzr 1000 and 1000 xp4, High lifter too. Oem#5633321

29-66 Primary clutch weights.  These fit a variety of Polaris machines, Rzr Trail S, General, Rzr HL from 2016+. Replaces oem#5633496

Our high quality hardened bearing steel spherical bearings are a excellent choice for replacing your worn out oem bearings in you 2011+ Rzr 900xp, 1000xp and RS1 trailing arms.  Replaces oem#3514689.  Sold as a pair(2 bearings and 4 O rings)

2011-14 RZR 900xp Polyurethane bushing set. This set does all the front A arms. You can't buy a better set of bushings for the money. Our bushings use an interference fit, which means the hole is smaller than the sleeve. This creates a perfect seal and I guarantee these will last longer than anything you've tried before. I highly recommend the sleeves, which will roughly double the life of the bushings.